Digger Wrench-N-Ride for Polaris Sportsman

Digger Wrench-N-Ride for Polaris Sportsman

SKU:
D-90
$29.99
Width:
2.00 (in)
Height:
6.00 (in)
Depth:
3.00 (in)
Current Stock:
Adding to cart… The item has been added
Description

DIGGER WRENCH-N-RIDE FOR POLARIS SPORTSMAN

Instructions:

1) Insert the rubber side of the Wrench-N-Ride expansion plugs into the holes in the deck of your ATV rack.

2) Tighten the nut on the topside of the L-Bracket until the rubber expands inside the hole of the rack.

3) After both L-Brackets are firmly secured on the composite rack place the Auger Carrier against the uprights of the L-Brackets.

4) Once placed against the uprights of the L-Brackets, mark the holes onto the carrier to be drilled.

5) Remove the Auger Carrier and drill the marked holes with a 1/4” drill bit.

6) After drilling the two holes, place the Auger Carrier against the upright angles and bolt both together with supplied bolts and lock nuts.